DK25-D0710-4C-1
Standard Shipping
👉 Standard shipping is normally used for orders and it is free of charge.
Expedited Shipping
👉 Expedited shipping is considered a special service, and the shipping fee varies depending on the order amount. Please refer to our Shipping Policy page for detailed rates and conditions.
The Australian Grape Chandelier features a sophisticated design crafted from glass, showcasing a vibrant palette that enhances any staircase setting. Its artistic form and rich colors create a striking focal point, combining elegance with expert craftsmanship to elevate your interior space.

If you have any questions about our products, please contact us and we will get back to you within 12 hours.
Product Size
Size A: ∅ 23.6″ x H 39.4″ / Dia 60cm x H 100cm
Size B: ∅ 39.4″ x H 59.1″ / Dia 100cm x H 150cm

Parameter
Purchase Notes
If you have problems with customs clearance and shipping damage, please contact us by email. Email address: info@dekoorlight.com
Please be advised that we include an installation instruction sheet for this product in the packaging of each product. Please follow the instructions in the installation instruction sheet to install. To ensure a smooth installation and your safety, please wear gloves during the installation of the lamp.
Details:
1. For chandeliers, pendants, ceiling lamps, and wall lamps without sockets.
Hanging height: The standard hanging length is 59.0 inches (1.5 meters/150 cm). Need a custom size? Please contact us.
Sloped ceilings: All wire hanging lamps can easily adapt to sloping or uneven ceilings.
Size: Need a specific size not listed on the product page? Please contact us.
Installation steps:
1. Turn off the power: Find the circuit breaker or fuse box that controls the power to the installation area. Turn off the power supply to avoid any electrical hazards during the installation process.
2. Mark the mounting holes: Place the included mounting bracket against the wall at the desired mounting height. Mark the location of the screw holes on the wall with a pencil. Make sure the bracket is level.
3. And insert anchor bolts: Use an electric drill to drill holes at the marked locations on the wall. Insert the included anchor bolts into the drilled holes to provide a secure fixing point for the screws.
4. Mount the bracket: Align the holes on the mounting bracket with the anchor bolts on the wall. Screw the screws through the bracket holes and into the anchor bolts. Tighten the screws with a screwdriver to securely fix the bracket to the wall.
5. Connect the wires: Carefully remove the cover of the LED light and enter the wiring cavity. Identify the black (live/live), white (neutral) and green or bare copper (ground) wires and connect them to the existing circuit.
6. Final inspection: After the installation is completed, turn on the light switch. If the brightness is OK, congratulations, you are done!!
Note: For floor lamps and table lamps, just plug the plug into the corresponding socket and turn on the switch.
If there are any questions during the installation process, to ensure that your lamp is installed smoothly, please contact us in time and we will have professional people to reply.
Returns are easy! 30-day return policy available for all purchases.
Professional designers guide installation, and all lamps come with a 3-year Dekoor warranty.