Bogenförmiger Ginkgo-Kronleuchter
- Auf Lager
- Nachbestellt, bald verfügbar
- LED-Leuchtmittel enthalten
- Nachhaltige Verpackungen
- Sichere und geschützte Zahlungen
- Anpassung unterstützen
- Kostenloser Standardversand
Verwenden Sie ausklappbare Tabs für detailliertere Informationen, die Kunden bei ihrer Kaufentscheidung helfen.
Bsp.: Versand- und Rückgabebedingungen, Größentabellen und andere häufige Fragen.
Der bogenförmige Gingko-Kronleuchter besticht durch Keramikelemente und ein modernes Design, was ihn zur idealen Wahl für alle macht, die bei ihrer Beleuchtung Wert auf Raffinesse und Stil legen. Mit fachmännischer Präzision und Liebe zum Detail gefertigt, verleiht dieser Kronleuchter jedem Raum einen Hauch von Eleganz.

*Wenn Sie andere Größen benötigen, kontaktieren Sie bitte unseren Kundenservice. Wir werden einen Designer beauftragen, die passende Produktgröße basierend auf den Maßen Ihres Einsatzbereichs anzupassen.
Falls Sie Fragen zu unseren Produkten haben, kontaktieren Sie uns bitte; wir werden uns innerhalb von 12 Stunden bei Ihnen melden.
Produktgröße
Größe A: ∅ 80 cm x H 40 cm
Größe B: ∅ 100 cm x H 40 cm
Größe C: ∅ 120 cm x H 40 cm

Parameter
- Stil: Modern
- Material: Metall, Keramik
- Lichtquelle: Integriertes LED / G9
- Farbtemperatur: 3000-6000 K
- Spannung: AC 110-240 V
- Montage: Deckenmontage
- Umgebung: Innenbereich
- Anwendbarer Bereich: 10-15㎡
- Anwendbarer Raum: Zuhause, Schlafzimmer, Wohnzimmer, Hotel etc.
- Ausführungen: Weiß + Gold
- IP-Schutzart: 20 – nicht wasserfest
- Zertifizierung: UL, CE, CCC, SAA etc.
Hinweise zum Kauf
Bei Problemen mit der Zollabwicklung oder Transportschäden kontaktieren Sie uns bitte per E-Mail. E-Mail-Adresse: info@dekoorlight.com
Please be advised that we include an installation instruction sheet for this product in the packaging of each product. Please follow the instructions in the installation instruction sheet to install. To ensure a smooth installation and your safety, please wear gloves during the installation of the lamp.
Details:
1. For chandeliers, pendants, ceiling lamps, and wall lamps without sockets.
Hanging height: The standard hanging length is 59.0 inches (1.5 meters/150 cm). Need a custom size? Please contact us.
Sloped ceilings: All wire hanging lamps can easily adapt to sloping or uneven ceilings.
Size: Need a specific size not listed on the product page? Please contact us.
Installation steps:
1. Turn off the power: Find the circuit breaker or fuse box that controls the power to the installation area. Turn off the power supply to avoid any electrical hazards during the installation process.
2. Mark the mounting holes: Place the included mounting bracket against the wall at the desired mounting height. Mark the location of the screw holes on the wall with a pencil. Make sure the bracket is level.
3. And insert anchor bolts: Use an electric drill to drill holes at the marked locations on the wall. Insert the included anchor bolts into the drilled holes to provide a secure fixing point for the screws.
4. Mount the bracket: Align the holes on the mounting bracket with the anchor bolts on the wall. Screw the screws through the bracket holes and into the anchor bolts. Tighten the screws with a screwdriver to securely fix the bracket to the wall.
5. Connect the wires: Carefully remove the cover of the LED light and enter the wiring cavity. Identify the black (live/live), white (neutral) and green or bare copper (ground) wires and connect them to the existing circuit.
6. Final inspection: After the installation is completed, turn on the light switch. If the brightness is OK, congratulations, you are done!!
Note: For floor lamps and table lamps, just plug the plug into the corresponding socket and turn on the switch.
If there are any questions during the installation process, to ensure that your lamp is installed smoothly, please contact us in time and we will have professional people to reply.