Kleine Kürbis-Hängeleuchte
DK25-C1016-3PL-1
- Auf Lager
- Nachbestellt, bald verfügbar
- LED-Leuchtmittel enthalten
- Nachhaltige Verpackungen
- Sichere und geschützte Zahlungen
- Anpassung unterstützen
- Kostenloser Standardversand
Standardversand
- Bearbeitungszeit: 3–5 Werktage.
- Versandzeit: 12–25 Werktage.
- Gesamtlieferzeit: ca. 15–30 Werktage vom Kaufdatum bis zur Zustellung.
👉 Der Standardversand wird normalerweise für Bestellungen verwendet und ist kostenlos.
Expressversand
- Bearbeitungszeit: 1–3 Werktage.
- Versandzeit: 9–12 Werktage.
- Gesamtlieferzeit: ca. 10–15 Werktage vom Kaufdatum bis zur Zustellung.
👉 Der Expressversand gilt als besonderer Service; die Versandkosten variieren je nach Bestellwert. Detaillierte Preise und Bedingungen finden Sie auf unserer Seite Versandbedingungen.
Die Little Pumpkin Pendelleuchte verleiht jedem Raum mit ihrem charmanten, vom Kürbis inspirierten Design einen warmen, einladenden Schein – jetzt mit dreifarbiger Dimmfunktion für noch mehr Flexibilität. Mit dieser praktischen Funktion können Sie sowohl die Farbtemperatur als auch die Helligkeit anpassen: Wechseln Sie für gemütliche Abendessen oder entspannte Wochenenden zu sanftem warmem Licht (3000K) oder für konzentrierte Aufgaben wie die Küchenarbeit oder zum Lesen im Schlafzimmer zu klarem, kühlem Licht (6000K). Dimmen Sie die Helligkeit nach Belieben, damit es nie zu grell oder zu dunkel ist.

Werten Sie das Ambiente Ihres Zuhauses mit der Little Pumpkin Pendelleuchte auf, einem stilvollen Herzstück, das wohlige Wärme und Charme ausstrahlt. Ihre einzigartige Kürbisform verleiht jedem Raum Charakter und lädt zum Wohlfühlen ein – ein Muss für alle, die Wert auf Design und Atmosphäre legen. Perfekt für Küchen oder Wohnbereiche verwandelt diese Pendelleuchte gewöhnliche Beleuchtung in ein bezauberndes Erlebnis. Machen Sie Ihren Raum unvergesslich – entscheiden Sie sich noch heute für die Little Pumpkin Pendelleuchte.

Wenn Sie Fragen zu unseren Produkten haben, kontaktieren Sie uns bitte und wir werden uns innerhalb von 12 Stunden bei Ihnen melden.
Produktgröße
Größe A: ∅ 7.1″ x H 7.5″ / Ø 18 cm x H 19 cm
Größe B: ∅ 11″ x H 8.3″ / Ø 28 cm x H 21 cm
Parameter
- Stil: Modern
- Material: Harz, Holz
- Lichtquelle: E26 oder E27
- Farbtemperatur: 3000-6000K
- Spannung: AC 110-240V
- Montage: Decke
- Umgebung: Innenbereich
- Anwendbarer Bereich: 10-15㎡
- Anwendbarer Raum: Zuhause, Schlafzimmer, Wohnzimmer, Hotel usw.
- Ausführungen: Holzfarbe, Gelb
- IP-Schutzart: 20 – nicht wasserdicht
- Zertifizierung: UL, CE, CCC, SAA usw.
Kaufhinweise
Sollten Probleme bei der Zollabfertigung oder Transportschäden auftreten, kontaktieren Sie uns bitte per E-Mail. E-Mail-Adresse: info@dekoorlight.com
Please be advised that we include an installation instruction sheet for this product in the packaging of each product. Please follow the instructions in the installation instruction sheet to install. To ensure a smooth installation and your safety, please wear gloves during the installation of the lamp.
Details:
1. For chandeliers, pendants, ceiling lamps, and wall lamps without sockets.
Hanging height: The standard hanging length is 59.0 inches (1.5 meters/150 cm). Need a custom size? Please contact us.
Sloped ceilings: All wire hanging lamps can easily adapt to sloping or uneven ceilings.
Size: Need a specific size not listed on the product page? Please contact us.
Installation steps:
1. Turn off the power: Find the circuit breaker or fuse box that controls the power to the installation area. Turn off the power supply to avoid any electrical hazards during the installation process.
2. Mark the mounting holes: Place the included mounting bracket against the wall at the desired mounting height. Mark the location of the screw holes on the wall with a pencil. Make sure the bracket is level.
3. And insert anchor bolts: Use an electric drill to drill holes at the marked locations on the wall. Insert the included anchor bolts into the drilled holes to provide a secure fixing point for the screws.
4. Mount the bracket: Align the holes on the mounting bracket with the anchor bolts on the wall. Screw the screws through the bracket holes and into the anchor bolts. Tighten the screws with a screwdriver to securely fix the bracket to the wall.
5. Connect the wires: Carefully remove the cover of the LED light and enter the wiring cavity. Identify the black (live/live), white (neutral) and green or bare copper (ground) wires and connect them to the existing circuit.
6. Final inspection: After the installation is completed, turn on the light switch. If the brightness is OK, congratulations, you are done!!
Note: For floor lamps and table lamps, just plug the plug into the corresponding socket and turn on the switch.
If there are any questions during the installation process, to ensure that your lamp is installed smoothly, please contact us in time and we will have professional people to reply.