Outdoor LED Wall Sconce Exterior Wall Mount Porch Light
DK26-916-1OL-1
- In stock, ready to ship
- Backordered, shipping soon
- LED bulb / light source included
- Sustainable Packaging
- Save and secure payments
- Support customization
- Free standard shipping
Standard Shipping
- Processing Time: 3–5 business days.
- Shipping Time: 12–25 business days.
- Total Lead Time: approximately 15–30 business days from the date of purchase to delivery.
👉 Standard shipping is normally used for orders and it is free of charge.
Expedited Shipping
- Processing Time: 1–3 business days.
- Shipping Time: 9–12 business days.
- Total Lead Time: approximately 10–15 business days from the date of purchase to delivery.
👉 Expedited shipping is considered a special service, and the shipping fee varies depending on the order amount. Please refer to our Shipping Policy page for detailed rates and conditions.
Curved Outdoor Wall Sconce for Exterior Home Lighting
Fit for porches, patios, side yards and garage exteriors, this black curved outdoor wall sconce delivers soft warm‑glow illumination to lift home exterior curb appeal. Built with rust‑proof aluminum housing, this exterior wall light supports fast heat dissipation to sustain steady performance under outdoor operating conditions. Two functional configurations are offered, including constant‑on setting and motion‑sensor activated setting, to match varied porch lighting demands.
Key Product Advantages
This black curved LED outdoor wall sconce delivers warm‑glow lighting for porches, patios and garage exteriors. The exterior wall mount light adopts aluminum build for rust‑resistant performance and efficient heat dissipation for outdoor wall‑mount installation. This porch wall fixture supports constant‑on and motion‑sensor modes, matching common residential exterior lighting requirements.
Product Size
Size: W 3.54" × D 11.42" × H 3.94" / W 9cm × D 29cm × H 10cm
Parameter
Style: Industrial
Material: Aluminum, Acrylic
Light source: Integrated LED
Color Temperature: 3000-6000K
Voltage: AC 85-265V
Illumination Area: 86 sq.ft - 129 sq.ft
Mounting: Wall
Environment: Balcony, Indoor, Outdoor
Applicable area: 10-15㎡
Finishes: Black
IP rating: 65
Certification: UL, CE, CCC, SAA, etc.
Purchase Notes
If you have problems with customs clearance and shipping damage, please contact us by email. Email address: info@dekoorlight.com
Please be advised that we include an installation instruction sheet for this product in the packaging of each product. Please follow the instructions in the installation instruction sheet to install. To ensure a smooth installation and your safety, please wear gloves during the installation of the lamp.
Details:
1. For chandeliers, pendants, ceiling lamps, and wall lamps without sockets.
Hanging height: The standard hanging length is 59.0 inches (1.5 meters/150 cm). Need a custom size? Please contact us.
Sloped ceilings: All wire hanging lamps can easily adapt to sloping or uneven ceilings.
Size: Need a specific size not listed on the product page? Please contact us.
Installation steps:
1. Turn off the power: Find the circuit breaker or fuse box that controls the power to the installation area. Turn off the power supply to avoid any electrical hazards during the installation process.
2. Mark the mounting holes: Place the included mounting bracket against the wall at the desired mounting height. Mark the location of the screw holes on the wall with a pencil. Make sure the bracket is level.
3. And insert anchor bolts: Use an electric drill to drill holes at the marked locations on the wall. Insert the included anchor bolts into the drilled holes to provide a secure fixing point for the screws.
4. Mount the bracket: Align the holes on the mounting bracket with the anchor bolts on the wall. Screw the screws through the bracket holes and into the anchor bolts. Tighten the screws with a screwdriver to securely fix the bracket to the wall.
5. Connect the wires: Carefully remove the cover of the LED light and enter the wiring cavity. Identify the black (live/live), white (neutral) and green or bare copper (ground) wires and connect them to the existing circuit.
6. Final inspection: After the installation is completed, turn on the light switch. If the brightness is OK, congratulations, you are done!!
Note: For floor lamps and table lamps, just plug the plug into the corresponding socket and turn on the switch.
If there are any questions during the installation process, to ensure that your lamp is installed smoothly, please contact us in time and we will have professional people to reply.